|
Brief Introduction
The task of
the separator differentiates and separates one certainty of
regeneration materials out of the target mixing and the pre-separation
and recovery light packaging materials. The near infrared
ray sensors identify the target materials and sends out the
unloading signals by way of the detectors which are installed
on the breadth of the whole classification. The special-installed
setup - the unloading device could use the air pressure flow
to separate and unload the identified materials out separately
and reliably. All the equipment composition parts are adjusted
and made to the most ideal condition one another, therefore,
the reliable operation of the whole equipment could be guaranteed.
The structure of the separator is compact, it is installed
firmly, it can be installed on the present available classified
devices conveniently. The separator could save the separation
materials of high expenses and reduces the separation working
procedures.
The separation light packaging
materials need to be loaded and unloaded on the acceleration
belt and conveyed for sorting. The running speed of the conveyer
belt is about 3m/s. The separation materials on the conveyance
belt shall be thrown off at a very quick speed or we can say
that the sensor throws out of the separation materials. During
the lead-time of short period, the sensor can detect the utmost
important measured data; it could complete the data processing
and urging to unload the packaging materials when necessary.
The mainstream packaging materials fall down on one certain
conveyance belt and then are conveyed to next processing working
procedure.
| Technical Data |
mm |
Separation Materials: the packaging
materials and other regeneration materials coming from
the recovery system
- Production Capacity (Each Set): Max. 10t/h, it is made
in accordance with the separation width
- Separation Rate: 80% or much higher
- Separation Purity: 90% or much higher
- Equipment Dimensions (Height、Width、Length): It is made
in accordance with the separation width.
- Separation Speed: 2 - 3 m/s
- Energy Consumption: About 5 KW
- Air Flow Rate: About 1000 l/min when it is 8 bar.
- Size of the Separation Materials: From 60mm to 250mm
to 400mm
- Separation Width: 800mm、1000mm、1400mm、1600mm、1800mm、2000mm、2200mm
- Systematic Power: About 12kw (including the conveyor)
|
|
Automatic Infrared Ray Separation
System
|
